Purple Harry Bike Polishing MittFollowing my high scoring reviews of the Bike Floss (90%) and the Bike Polish & Frame Protector (100%) from UK Company Purple Harry, I now turn to their Wash & Polish Mitt.

It is made from good quality microfibre material and shaped into a three fingered ‘lobster claw’ glove, which according to their website “has been ergonomically designed with the bike’s shape and contours in mind – allowing access to difficult areas whilst avoiding catching on the drive train and snagging in components”.

For this review I will be comparing this mitt with my usual cleaning materials; standard square shaped microfibre cloths bought from my local Pound store!

The Mitt costs at least SIX times more than the cloths I have been using for many years for cleaning and polishing duties, but is it worth the extra expense?

I hit a problem with the Mitt straight away; I couldn’t get it onto my hand.

image2

My hands are not excessively large, but I struggled for a while before having to resort to using scissors to cut the black narrow cuff stitched into the Mitt to allow my hand in. Due to the Lobster claw shape your second and third fingers are forced apart, which felt uncomfortable to start with, but overtime became less troublesome.

Also while working on the bike, because you have two pairs of fingers held together, it restricts how well you can get into those small little gaps and crevices that need to be reached while cleaning or polishing. My natural instinct is to use just the finger-tip of my index finger to get to those more intricate areas, something you can’t do very successfully with this Mitt as the combined width of two fingers stops you reaching as far as you would like.

Also with my normal square cloth I can easily reach every corner on the frame by using it in a flossing action by just pulling one corner into the tight spot, for example cleaning between the rear wheel and chain stays, the gap is far too narrow to get my finger in between.

image3 Another disadvantage of using the Mitt is that the actual area of material that you can use for cleaning/polishing is very limited; meaning that it quickly becomes too dirty or clogged. You have the whole Mitt but in reality can only effectively use the finger tips for finer work and the length of your fingers for working on the more accessible areas.

To use the other side you will need to take the Mitt off and put it on your other hand. This means that it might become too dirty to finish the job, you will have to wash it after every use or you will need to buy a couple more!

My way of working is that I currently have several image4microfibre cloths in use, each one is given a different task depending on how dirty it is; brand new ones are used for dusting and polishing only, but once they become clogged or a little dirty they then move onto drying or light cleaning duties and the previous one used for this purpose is ‘downgraded’ to more dirty tasks and so on until the very last one is used exclusively for chain cleaning work – and once this is oil soaked it is binned and another trip to the Pound shop is made to buy a fresh one to start the process again.

These cloths can be washed too, but as they cost as little as 99p for three it is not worth the effort. As they are square shaped you can use every inch of the cloth, both sides included, and by wrapping your index finger in the cloth with the remainder held in the palm of your hand you can reach those smaller awkward places with a clean patch of fabric every time unlike the Mitt.

From the picture above; in the bottom left is a new cloth, and each one in a clockwise direction becomes progressively dirtier.

image5So, as you can gather from my comments, I would not recommend that you pay £5.99 for this Mitt, instead buy six standard cloths and use a rotation system similar to mine, you will get much more value for money and they’ll do a better job too!

Left, is a comparison of cleaning area between the Mitt and cloths for the same price. Unfortunately I am awarding my lowest score so far, all the effort that has gone into cutting out the shape, stitching it together and attention to detail like adding the cuff and Purple Harry label has not only cost a lot to do, it has also severely restricted its usefulness, which is reflected in my score below:

 

Sorry to the Guys at Purple Harry, I can only give the Mitt a paltry score of 17%.

jerseyPurpleHarryMittReviewRating

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

X