I was delighted to receive two tickets to the London Bike Show last weekend and rather gutted to find out I couldn’t go. As an ex-pro who still cycles every day, my Dad was of course, more than happy to pop along. Here’s Tony’s account of the bike show on Saturday…
*****
The moment I stepped off the Docklands Light Railway on Saturday morning I knew it was going to be busy. The snow that had fallen copiously in the London area the previous day meant I had to use public transport although I have never been totally comfortable travelling on a driverless train and leaving everything to a computer. I had assumed that the weather would keep a lot of people at home but I was so wrong. The masses propelled me towards the entrance and looking around at my fellow visitors I couldn’t help but notice how well prepared they were for bad weather with a good selection of beanie hats, stout boots and several in what appeared to be rubberised jackets. All was to become clear.
The queue at the entrance was at least 50 deep but moved quickly. My ticket was snatched away and I found myself inside the ExCeL centre – but oh no, the overhead banner proclaimed “Welcome to the London Boat Show”! My inner chimp panicked, how would I retrieve my ticket and get back out? Then I heard someone say “the Bike Show is in the hall at the end”. Tickets gave access not only to the Bike Show but also to the Boat Show, The Outdoors Show and the Active Travel Show.
It wasn’t yet 11 a.m. but it appeared that the Bike Show was drawing in well over 25% of the visitors and so my slow shuffle down the first isle began. The sheer volume of people attending in such bad weather is a fine testament to the popularity of cycling, however, on this occasion it did make it difficult to have a chat with stand attendants.
Even though progress was slow, what struck me straight off was the number of stands showing complete road bikes for sale. Pinarello had the largest stand, right in the centre, displaying a wide range of complete bikes from entry level sportives at around £1,000 to their top end time trial machine coming in at £14,000. If you can only manage £11,000 then you can pick up a nice little track number. Boardman was also there in force at the far end, close to the Animal Bike stunt track where Martyn Ashton (four times British Bike Trial Champion) and Blake Samson were performing mind boggling acrobatics and aerial manoeuvres.
I know I’m an oldie, and call me old fashioned if you want but much of the roadie’s off season pleasure used to be gained from reviewing and selecting the various components that were to be built onto the coming season’s new frame. Now the pressure of volume production versus price directs most of us towards pre-configured complete bikes built around a mass produced monocoque carbon fibre frame, 99% of which are manufactured from one of four or so factories in the far east using carbon fibre spun from one of three Japanese facilities, Toray, Toho Tenax and Mitsubishi Rayon. Time and time again I asked where the vendor’s frames were produced and got the same answer. At Canyon Bikes I asked again if their frames were made in China? “No” the proud German lady proclaimed, I was momentarily excited – perhaps it would be Dusseldorf or Nuremburg, but alas “….ours are manufactured in Tie-van” (she meant Taiwan)!
I could only find three suppliers displaying custom carbon frames. Sigma Sport were offering a hand built custom carbon frame from the iconic Italian Colnago house using preformed carbon lugs bonded to the tubes. I was told Signore Colnago strongly believes this is the right way to do it. You would need £3,000 or more to have one made to measure but I can’t help thinking that these are like giant Airfix kits – preformed pieces glued together and very quick to assemble, although I must admit the multi-stage hand paint process is fabulous.
Le Beau Velo, distributor for the Italian Fondriest brand were offering a bespoke carbon fibre ‘layup’ frame, where the joints are held together with cut-to-fit carbon fibre sheets bonded with epoxy resin rather than preformed lugs. I was told no UK fabricator does this. These frames are hand made in Italy and again have a price tag north of £3,000. Their tubes are constructed from Toray carbon fibre from Japan but they claim the actual manufacturing of the tubes is performed in Italy, presumably by ATR who also supply Colnago and are one of the very few non-Asian manufacturers of monocoque frames. Equally as strong, stiff and responsive as a carbon monocoque, Le Beau Velo’s typical custom frame customer is a gentleman of a certain standing who can afford something that looks special…that is special, whilst still young enough to ride to its full potential (or most of it anyway), “a top end racing frame that is seldom used for racing”.
The Extra stand was also displaying carbon lugged frames manufactured by Time. Time is a French company who obtain a lot of their revenue from contracted carbon fibre work at the Airbus aircraft factory in Toulouse. This has enabled them to become another of the very few non-Asian manufacturers of carbon fibre weave, although their volume in comparison to the far east manufacturers is very small and the number of frames they produce is also small in comparison.
Independent steel and titanium frame builders were noticeable by their absence and I saw only a handful of non-carbon frames for the serious rider. There was no Bamboo construction in evidence at all, which is surprising given the ‘green’ momentum these fabulous machines have been getting. Perhaps the cost of renting a stand at the show is prohibitive to all but the largest suppliers and distributors.
One final note; I happened to be ushered by the masses out of an isle just in front of the Jaguar Performance Theatre as the newly formed professional team sponsored by Madison Genesis was being presented (video below). First up was Dean Downing followed by 8 or 9 fresh faced professionals all hoping to be part of this year’s UCI Continental team under Roger Hammond’s stewardship. They also announced that Genesis has been working with Reynolds to develop a new ‘953’ steel-alloy frameset.
Overall, a hugely enjoyable and educational experience, if hampered a little by the sheer volume of visitors. I stopped on the way back to meet my wife at the newly built Westfield-Stratford shopping mall. It was empty by comparison!
Hayley Davies
Writer
Riding since Feb 2011 Hayley is a 30 year old female who loves adventures. If she’s not on one of her many bikes or in the water on a bodyboard/surfboard, then Hayley is probably out looking for something new to keep the adrenaline pumping! Website: www.hjdonline.co.uk
I had the pleasure of meeting Martyn Ashton at the Revolution 37 (report online shortly) in Manchester where he made a special guest appearance and I realised I hadn’t shared his brilliant film with you.
In the style of the much followed Danny MacKaskill productions, but Martyn adds a twist; he takes the £10k carbon road bike used by Team Sky‘s Bradley Wiggins & Mark Cavendish for a ride with a difference. With a plan to push the limits of road biking as far as his lycra legs would dare, Martyn looked to get his ultimate ride out of the awesome Pinarello Dogma 2. This bike won the 2012 Tour de France – surely it deserves a Road Bike Party!
Shot in various locations around the UK and featuring music from ‘Sound of Guns‘. Road Bike Party captures some of the toughest stunts ever pulled on a carbon road bike.
A Film by Robin Kitchin
Produced by Ashton Bikes
Music: Sound of Guns ‘Sometimes’
Well here I am on the eve of the World Championships here in Montichiari, I’ve had 3 sessions on the track since arriving here, and each one of them has been more and more encouraging. The track feels fast, and my legs feels good, I just hope that feeling lasts for the next 3 days as I have a lot of racing to do between now and Sunday evening. First up is the pursuit, the big unknown for me, sure I’ve done pursuits before, but this is the first time I’ve focused on it and trained with the goal of competing at a major championship, and with London [Olympics] just over a year away it will be an interesting test. After the pursuit I’m into more familiar territory with the kilo and team sprint both, of which I’m aiming to retain my world titles in.
In preparation for these worlds, as a team we’ve spent 2 weeks training on the boards of Newport velodrome, mainly to get away from the chaos and busy track in Manchester as the able-bodied team prepared for the world championships, but also to prepare together as a team. Over the 2 weeks in Newport my training covered all aspects of my racing with starts, pursuit and flying efforts and team sprint practice. During the 2nd week we had the trial for the team sprint, with 4 riders going for 3 places. Rik Waddon and Darren Kenny were competing for man 1, and myself and Terry Byrne were trialling to see who would ride 2nd and 3rd man. The trial was basically 2 full team sprints, and everything would be recorded and filmed so all elements of the ride could be analysed. First up was Darren, myself and Terry, this turned into a mission, as on the first try I picked up a puncture in turn 1, meaning an abandoned attempt, then sat on the start line for the re-run my helmet buckle fell off my aero helmet, so with my road helmet on it was 3rd time lucky! (Hope it’s not going to be like this at the worlds!) With a smooth start and equally smooth changes our benchmark was set. 60mins later we were up on track again, this time with Rik leading off and myself and Terry switching order. This time the trial went smoothly with another really good ride in the bag.
Amazingly both rides were inside the current WR, so things were looking up and it was nice knowing that we had world class backup rider no matter what team we’d go with. The following morning once the coaches had analyzed all the footage and crunched the numbers, the team sprint was selected, Darren Kenny man 1, Terry Byrne man 2 and myself man 3, a new team line up lets hope our debut goes well.
Also on the Newport camp I took part in a photo shoot with photographer Richard Booth, who is producing a coffee table book of London 2012 hopefuls. I’m looking forward to seeing the shots in print as the samples I saw a glimpse of looked amazing. Actually it’s been a month of photo shoots, as just before I left for the world championships I was invited by Sky Sports to take part in a shoot they were doing for their 20th Anniversary, again it was for another coffee table book, with all these books I’m not sure where my coffee’s going!
Once Newport was over it was back to the boards of Manchester, but not as a rider, entering a contest on Cycling Weekly’s facebook page I found myself the winner of 2 tickets to the Manchester leg of the World Cup. I had a great day, and was soaking up the home atmosphere, and imagining what it’s going to be like in London with twice the amount of people cheering that loud, London really is going to be something special, but lots of training to do before then!
Inspired by the world cup performances it was back to the boards of Manchester to put the finishing touches to our preparation and start the all important taper.
Outside of the cycling I’ve been busy working on my website, and after months of it being under construction it’s actually finished and fully up and running, so go take a look www.jodycundy.com any feedback would be greatly appreciated.
Prior to coming to Italy I ended up getting all artistic, with my prosthetic cycling leg. I’d had a few conversations with potential sponsors and it became clear that for some reason my disability on the bike wasn’t visible. I guess my black carbon leg was blending into my black carbon bike. Anyway a quick trip to Halfords and I had sand paper, primer, paint, and clear lacquer. Now I just needed a paint booth, as the weather was awful outside, so our shower room became a temporary booth and masked it all off making sure everything was covered! (Thanks Christina! Can’t believe she agreed to it!)
Anyway leg all keyed up it was primer time, what a transformation that made, the leg looked completely different with just the white primer on, I couldn’t wait to get onto the next level of paint, but patience was the key and I had to wait for it to dry completely. Good job I wasn’t on the track with it for a few days. Once the paint was dry it was time to give the leg some colour, with some world bands applied with trusty coloured electrical tape, I then spent the afternoon printing out transfers, before spending hours carefully applying them to the leg. A quick clear coat over the top and it was all finished. A bright white leg, carrying the world bands, finished off with my name, a Union Jack, my leg sponsors logo, and my final finishing touch, 7 gold medals for each of my World and Paralympic cycling titles, if all goes well it would be nice to add a few more! Check out the pics.
I have to say I’m looking forward to these championships, it’s seems like an eternity since I’ve raced at the very top level, and I can’t wait!
Also it will be the first time all the members of the Para-T team I helped set up will be together. The next time will be at out debut race, at the Good Friday track meeting in Manchester on April 22nd.
Well until next time, and stories from the world champs. Happy Cycling!
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.Accept
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Subscribe for 10% Discount!
Join our mailing list to receive the latest cycling news and updates from our team. Receive 10% off your first order placed in our online shop!
You must be logged in to post a comment.